Does not contain Volatile Organic Compounds (0% VOC!)
RMC Hybrid Wood Protector creates an ecological protective coating for your new and weathered wood. It provides protection against fading and rotting of wooden facades in terraces, shutters, portals, garden furniture, frames, pontoons and the like. It is also suitable for indoor use. It is guaranteed to be applied in only one layer. It is easy to maintain and can be repaired without the need for sanding. It does not form a film layer. It does not make particles.
– Soak the wood.
– With the help of RMC Exterior Wood Cleaner, use a medium hard nylon brush to clean the surface.
Rinse thoroughly until the foam disappears.
– Let it dry.
Usage of RMC Exterior Wood Cleaner:
In 1 liter = +/- 15 m2
a) Mix the product well before use.
b) Apply a thin layer of RMC Hybrid Wood Protector with the help of a flat brush or RMC patio brush.
c) Leave it to react for 10 minutes.
d) The surface should be leveled again with the same brush (without using a new product).
e) After 5 minutes, wipe off any traces of excess product with a piece of cloth. Provides waterproofing after 24-36. It is ready to use after 48 hours.
Usage on outdoor wood: +/- 30 m2 / L
Normal maintenance: RMC Exterior Soap
– Rinse the surface.
– Shake the spray well and spray the product onto the surface.
– Clean it up.
– Let it dry.
For repair and maintenance: RMC Hybrid Wood Protector
If the color starts to fade, Repeat steps 1 and 2 (Preparation and Application)
RMC Hybrid Wood Protector is a suitable product for indoor use. (Furniture, Wooden Panels, Ceilings, Window Sills, Joineries and so on.)
1. Sand the surface and remove all dust residue.
2. Spread a small amount of the product on the surface with the help of a cloth or brush.
3. Wait a few minutes for it to react. Use a cloth to remove excess oil. It should feel dry on the surface!
We recommend our RMC Oil Plus 2C for the maintenance and repair of interior wooden floors, countertops and stairs.
Usage on Indoor Wood: +/- 50 m2 / L
Results may vary depending on wood products, weather conditions and preparation stage. We recommend experimenting and testing in a small area to determine adequate usage.
It can be used with any type of wood. (Exotic Wood, Softwood,thermowoodWood, Autoclave). Do not apply under 10ºC, direct sunlight and high temperatures. Apply in dry weather conditions. Do not cover and do not place heavy objects on the wood until it is completely dry. After using the product, close the packaging well and do not expose it to direct sunlight, protect it from frost and moisture. Never water it down.
Physical State: Liquid
Fragrance: Linseed oil
Volume: 0.95 – 1.3 kg / l
VOC: 0 g / l
Color: Natural, Teak, Royal, Wine Red, Chocolate, Gray, Black, Autoclave Green.
QUV: It was tested according to the EN 927-6 norm.
Complies with the toy safety norm: EN 71-3.
100 ml bottle, 0.5 liter bottle, 1 and 2.5 liter can.
The product can be stored for 12 months in its original packaging in a dry environment.